To test the customized DoorBird IP video door station in your real installation site, you can either upload a photo of the installation site or use your smartphone to project the DoorBird live into its surroundings (Augmented Reality).
If you did not get the ideal result with our configurator or if you have special wishes like a mailbox, please go to Individual Solutions.
There you can also get individual mailbox systems with DoorBird technology.
Help needed ? +49(0)-30-12084892 or for USA: 800 870-8957
firstname.lastname@example.org or for USA: email@example.com
There is not enough space for this engraving at the desired position.The engraving is permanently illuminated by a LED, even during the day. If the illumination is to be switched off automatically during daylight, please add the "Light Sensor" module and place it on the front panel.
With laser marking, the stainless steel is strongly heated by the laser beam. The material burns and produces a black engraving that is resistant to abrasion. Laser inscription is the most cost-effective method for small to medium font sizes. Laser engraving is not possible on front panels larger than 30cm x 50cm (11.8" x 19.7").
Milling engraving is a machining process in which a milling head is used to remove material from the workpiece (0.2mm/0.008"). The engraving is then filled with the desired colour.
For engraving through, material is engraved through the front panel. The opening is sealed from behind with a white or black Plexiglas pane. In addition, lighting can be configured from behind.